HomeKit-enabled carbon monoxide detector. It’s a high-sensitivity sensor that detects the presence of carbon monoxide (CO) gas at the early stage, then alerts you right away, in order to prevent carbon
monoxide poisoning.
It’s a high-sensitivity sensor that detects
the presence of carbon monoxide (CO) gas at the early stage, then alerts you right away, in order to prevent carbon
monoxide poisoning.
It’s a high-sensitivity sensor that detects
the presence of carbon monoxide (CO) gas at the early stage, then alerts you right away, in order to prevent carbon
monoxide poisoning.
Fan Coil Thermostat MH8 is a Z-Wave Plus
enabled device for indoor temperature
control.
It is mainly applied to a 2-pipe or 4-pipe Fan
coil system.
Fan Coil Thermostat MH6 is a Z-Wave Plus
enabled device for indoor temperature
control.
It is mainly applied to a 2-pipe or 4-pipe Fan
coil system.
DS-2CE10HFT-F- 5M BSI CMOS Sensor,5MP@20fps, 4MP@25fps(P)/30fps(N)(Default),Outdoor Bullet,0.0005Lux/F1.0, 0 Lux with Friendly Lighting,20m,3D DNR,12 VDC,OSD Menu(Up the Coax), 130dB True WDR, IP67, 3.6/6mm Lens,24H Color?Support TVI/AHD/CVI/CVBS video signal output, Metal
Motion Sensor with built-in temperature sensor. It will turn on lights when you enter a room and turn them off when you leave.
It’s a Contact sensor (Available for windows, door, safety gates, etc.) It alerts you in case any door or window were opened.
Remotely controlled thermostatic head to
control temperature in your room.
It can be mounted without tools on three
types of valves. Set of two devices:
The Heat Controller FGT-001; Temperature
Sensor FGBRS-001.
